446 ss has good mechanical qualities and is resistant to corrosion at extremely high temperatures. 446 Stainless steel cannot be hardened. Forging of ASTM A240 Stainless Steel 446 can begin at 1149°C (2100°F) and end at 871°C (1600°F). Hot processing of grade 446 stainless steel takes place between 1093 and 1177°C (2000-2150°F). stainless steel 446-grade Annealing must be done at a temperature of 816°C (1500°F). Oil burners, furnace parts, kiln liners, heat exchangers, stationary soot blowers in steam boilers, and glass molds are all made of Type 446 stainless steel. Stainless Steel 446 Sheets is a low interstitial variant of stainless steel that is popular for marine and cryogenic applications due to its increased toughness. Stainless Steel 446 is often utilized in an annealed state and is the material of choice in the medical implant industry. When oxygen and chlorides were present as impurities, 446 Stainless Steel Sheets occurred. Of the commercially available titanium alloys, 446 Stainless Steel Sheets offer the best combination of strength and toughness. Long-term exposure in the 500°F–800°F range is not recommended for SS 446 Plates, since this can result in high strength but low ductility. Overage these SS 446 Sheet between 950 and 1150 degrees Fahrenheit for decreased strength.
Specification of Stainless Steel 446 Sheets
- Sheet Specifications: ASTM A240 / ASME SA240, BS EN 10088-2, en 10028-7, IS 6911
- Dimensions: MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
- Thickness Range: 0.3 mm to 120 mm
- Width: 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
- Length: 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
- Finish: 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.
- Hardness: Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Available Types of Stainless Steel 446 Sheets
Stainless Steel 446 Hot Rolled Sheets
- UNS S44600 Hot Rolled Sheets
- ASTM A240 TP446 Hot Rolled Sheet
- ASME SA240 TP 446 SS Hot Rolled Sheets
- SS 446 HR Sheets
- Stainless Steel 446 Hot Rolled Sheet Stockist
- SS 1.4762 Hot Rolled Sheet Supplier
- 446 Stainless Steel Hot Rolled Sheet
- SS 446 Hot Rolled Sheets Exporter
- Stainless Steel 1.4762 Hot Rolled Sheets
- Stainless Steel S44600 Hot Rolled Sheets
- SS 1.4762 Hot Rolled Sheets Manufacturer
Stainless Steel 446 Cold Rolled Sheets
- UNS S44600 Cold Rolled Sheets
- 446 Stainless Steel Cold Rolled Sheet
- SS 446 Cold Rolled Sheets Manufacturer
- Stainless Steel S44600 Cold Rolled Sheets
- SS 446 CR Sheets
- ASTM A240 TP446 Cold Rolled Sheet
- Stainless Steel 446 Cold Rolled Sheet Stockist
- SS 1.4762 Cold Rolled Sheets Exporter
- Stainless Steel 1.4762 Cold Rolled Sheets
- SS 1.4762 Cold Rolled Sheet Supplier
- ASME SA240 TP 446 SS Cold Rolled Sheets
Stainless Steel 446 Shim Sheets
- 446 Stainless Steel Shim Sheet
- SS 446 Shim Sheets
- Stainless Steel 446 Shims Stockist
- Stainless Steel 446 Shim Sheets
- UNS S44600 Shim Sheets
- ASTM A240 TP446 Shim Sheet
- Stainless Steel 1.4762 Shim Sheet Supplier
- SS 1.4762 Shim Sheets Manufacturer
- SS 1.4762 Shim Sheets Exporter
- ASME SA240 TP 446 SS Shim Sheets
Equivalent Grades of Stainless Steel 446 Sheets
| STANDARD | WERKSTOFF NR. | UNS | BS | EN | JIS |
| SS 446 | 1.4762 | S44600 | 446S21 | X12Cr13 | SUS 446 |
Chemical Composition of Stainless Steel 446 Sheets
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
| SS 446 | 0.2 max | 1.5 max | 0.75 max | 0.04 max | 0.030 max | 23 – 30 | – | 0.50 max | 0.10 – 0.25 | Balance |
Stainless Steel 446 Sheets Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.5 g/cm3 | 1510 °C (2750 °F) | Psi – 75,000 , MPa – 485 | Psi – 40,000 , MPa – 275 | 20 % |
Contact us to get a quick quote for your requirement.
Other types of Stainless Steel 446 Sheet Stock
- SS 446 Sheets Manufacturer in India
- TP446 Stainless Steel CR Sheets
- Stainless Steel 1.4762 Sheet at Best Price in India
- ASME SA 240 446 Stainless Steel Perforated Sheet
- 446 SS Matt PVC Sheets
- Suppliers of 446 Stainless Steel Hot Rolled Sheet
- ASTM A240 TP446 Mill Finish #2 Sheet at Best Price
- SS 446 Mill Finish #2 Sheet Dealer
- Stainless Steel 446 BA Finish Sheets
- Polished Stainless Steel S44600 Sheet
- Stainless Steel 446 Sheets Supplier in Mumbai
- Stainless Steel 446 2B Finish Sheets
- ASTM A240 Stainless Steel 446 Shim Sheet
- Stainless Steel 446 Cut to Size Sheet
- 446 Stainless Steel Sheet #4 Finish
- SS S44600 Hot Rolled Sheets
- Stainless Steel 1.4762 Polished Sheets
- ASME SA240 TP446 Stainless Steel Custom Cut Sheet
- Stainless Steel 446 Shims
- Stainless Steel 1.4762 Perforated Sheet Dealer
- 446 Stainless Steel 2B Finish Sheet Supplier
- ASTM A240 Stainless Steel 446 2D Finish Sheet
- 446 Stainless Steel Cold Rolled Sheets
- Jindal 446 SS Sheets
Exporter of 446 Stainless Steel Sheets in the following Destinations
Countries
MIDDLE EAST
|
AFRICA
|
EUROPE
|
ASIA
|
Cities
| Bengaluru | Mumbai | Chennai | Hyderabad | Kolkata | Pune |
| New Delhi | Ahmedabad | Jaipur | Surat | Salem | Gandhinagar |
| Bhiwandi | Tiruppur | Sivakasi | Jamnagar | Thiruvananthapuram | Rajahmundry |
| Bhubaneswar | Vijaywada | Firozabad | Bokaro Steel City | Rajkot | Bharuch |
| Panna | Raipur | Cochin | Ludhiana | Panipat | Durgapur |
| Peenya | Pimpri-Chinchwad | Channapatna | Kharagpur | Nashik | Bareilly |
| Varanasi | Haldia | Rourkela | Bangalore | Moradabad | Indore |
| Visakhapatnam | Trivandrum | Pithampur | Dibrugarh | Angul | Gwalior |
| Coimbatore | Kannur | Nagpur | Vadodara | Rudrapur | Noida |
| Agra | Bhagalpur | Jamshedpur | Bhilai | Lucknow | kanpur |
| Thane | Bhopal | Navi Mumbai | Vasai | Bikaner | Maharashtra |