These enhanced characteristics, strength and hardness, are acquired by adding aluminum and titanium to the nickel-copper basis, as well as via a thermal precipitate procedure known as age hardening or aging. In some situations, Monel K-500 has a higher susceptibility of stress corrosion cracking when age-hardened than Monel 400. When compared to alloy 400, alloy K-500 has about three times the yield strength but twice the tensile strength.
Monel K500 Plate is a nickel, copper alloy approximately Ni 67 percent, Cu 23 percent that is impervious to elevated temperatures sea water and steam, as well as salt and caustic treatments. Monel K500 Plates is a solid solution alloy that can be toughened only by cold working. This nickel alloy has features such as strong corrosion resistance, weldability, and strength. Because of its moderate surface roughness in quickly moving brackish or seawater, good resilience to stress-corrosion cracking in most freshwaters, and resilience to a range of acidic environments, it has found widespread usage in the structural application and other non-oxidizing chloride situations. The raw material is transformed into completely completed Monel K500 forged fittings utilizing all required processes. Our quality control staff inspects the material in process numerous times to guarantee that the equipment is working properly.
Other Products

Specification of Monel K500 Plates
- Plate Specifications: ASTM B127 / ASME SB127
- Dimensions: MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
- Thickness Range: 0.01-200 mm
- Width: 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
- Length: 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
- Hardness: Half Hard, Quarter Hard, Soft, Hard, Spring Hard
Available Types of Monel K500 Plates

Monel K500 Hot Rolled Plates
- ASME SB127 K500 Monel Alloy Hot Rolled Plates
- UNS N05500 Hot Rolled Plates
- Monel K500 Hot Rolled Plates Exporter
- Monel Alloy K500 HR Plates
- Monel® Alloy K500 Hot Rolled Plates
- K500 Monel Hot Rolled Plate Stockist
- Nickel Alloy K500 Hot Rolled Plate
- Monel 2.4375 Hot Rolled Plates Manufacturer
- Monel K500 ASTM B127 Hot Rolled Plate
- ASTM B127 Alloy K500 Hot Rolled Plate
- Monel Alloy K500 Hot Rolled Plate Supplier

Monel K500 Cold Rolled Plates
- Nickel Alloy K500 Cold Rolled Plates Manufacturer
- Monel 2.4375 Cold Rolled Plates Exporter
- ASTM B127 K500 Monel Cold Rolled Plate
- Monel Alloy K500 Cold Rolled Plate Stockist
- ASME SB127 Monel K500 Cold Rolled Plates
- K500 Monel Alloy Cold Rolled Plate
- Monel® Alloy K500 CR Plates
- UNS N05500 Cold Rolled Plates
- Monel Alloy K500 Cold Rolled Plates
- Alloy K500 Cold Rolled Plate Supplier
- Monel K500 Cold Rolled Plates

Monel K500 Chequered Plates
- Alloy K500 Chequered Plates
- ASTM B127 Monel Alloy K500 Chequered Plate
- Monel 2.4375 Chequered Plates Manufacturer
- ASME SB127 K500 Monel Chequered Plates
- K500 Monel Alloy Chequered Plate
- Nickel Alloy K500 Chequered Plates Exporter
- Monel Alloy K500 Chequered Plates
- Monel K500 Chequered Plates Stockist
- Monel® Alloy K500 Chequered Plate Supplier
- UNS N05500 Chequered Plates
Equivalent Grades of Monel K500 Plates
STANDARD | WERKSTOFF NR. | UNS |
Monel K500 | 2.4375 | N05500 |
Chemical Composition of Monel K500 Plates
Grade | C | Mn | Si | Cu | S | Fe | Ni |
Monel K500 | 0.25 max | 1.5 max | 0.5 max | 27.00 – 33.00 | 0.010 Max | 0.5 – 2 | 63.00 min |
Monel K500 Plates Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 115000 , MPa – 790 | Psi – 160000 , MPa – 1100 | 20 % |
Contact us to get a quick quote for your requirement.
Other types of Monel K500 Plate Stock
- K500 Nickel Alloy Plate Supplier
- Monel Alloy K500 Plates
- ASTM B127 Monel K500 Plate
- Monel 2.4375 Plate Dealer
- Monel Alloy K500 Cut to Size Plate
- Alloy K500 Chequered Plates
- Monel Alloy 2.4375 Plates
- ASME SB127 Nickel Alloy K500 Custom Cut Plate
- K500 Monel® Alloy Cold Rolled Plates
- Monel K500 Plate Cut to Size
- Monel N05500 Hot Rolled Plates
- ASTM B127 Monel Alloy K500 Chequered Plate
- ASME SB127 Monel K500 Plates
- K500 Monel CR Plates
- Monel 2.4375 Plate at Best Price in India
- Monel K500 Plates Manufacturer in India
- Monel® Alloy K500 Plates
- K500 Monel Alloy Plate Suppliers
- Nickel Alloy K500 Plate
- Alloy K500 Plate Dealer
- ASME SB 127 Alloy K500 Chequered Plate
- Monel K500 Plates Supplier in Mumbai
- ASTM B127 Monel K500 Plate at Best Price
- Suppliers of N05500 Monel Hot Rolled Plate
Exporter of Monel K500 Plates in the following Destinations
Countries
MIDDLE EAST
|
AFRICA
|
EUROPE
|
ASIA
|
Cities
Bengaluru | Mumbai | Chennai | Hyderabad | Kolkata | Pune |
New Delhi | Ahmedabad | Jaipur | Surat | Salem | Gandhinagar |
Bhiwandi | Tiruppur | Sivakasi | Jamnagar | Thiruvananthapuram | Rajahmundry |
Bhubaneswar | Vijaywada | Firozabad | Bokaro Steel City | Rajkot | Bharuch |
Panna | Raipur | Cochin | Ludhiana | Panipat | Durgapur |
Peenya | Pimpri-Chinchwad | Channapatna | Kharagpur | Nashik | Bareilly |
Varanasi | Haldia | Rourkela | Bangalore | Moradabad | Indore |
Visakhapatnam | Trivandrum | Pithampur | Dibrugarh | Angul | Gwalior |
Coimbatore | Kannur | Nagpur | Vadodara | Rudrapur | Noida |
Agra | Bhagalpur | Jamshedpur | Bhilai | Lucknow | kanpur |
Thane | Bhopal | Navi Mumbai | Vasai | Bikaner | Maharashtra |