Nickel 201 Fasteners are also strong with 403MPa minimum tensile strength and 103MPa minimum yield strength after annealing, but they are not stronger than the 200 alloys. The Nickel 201Fasteners is used in applications where the application of the Nickel 200 Fasteners is not possible. The screws do not need nuts to hold them in place, so they are easy to install and maintain. The Nickel 201 Washer is used along with other fasteners to make the connections tighter. Our Nickel 201 Fasteners are immune to acids and alkalis, and dry gases at room temperature and also resistant to mineral acids depending on the temperature and concentration of the solution. Nickel 201 Fasteners provides high thermal and electrical conductivity and may be considered for service above 600 degrees F (316 degrees C)
While selecting a fastener, it is essential to know the specific uses for the given application. One should consider the following factors before installing permanent joints:
- Operating Temperature of the Environment
- Installation Procedures
- Weight Restriction of the Application(s)
- Accessibility
Industries that use Nickel 201 Fasteners–
- Chemical Industry- Bubble Cap Tray Column, Hot Air Generators, Shell and Tube Heat Exchangers, Centrifugal Machines, Chemical Vessel Reactors.
- Aerospace Industry- Transition ducts, Aerospace Liners, Instrumentation Components, Gas Turbines Rotary, blades.
- Marine Industry- Decontrol Drives, Electronic Controls, Monitoring and Services, Electric Heating, Harmonic Mitigation Filters.
- Food Processing Industry- Pulp tank, waste heat exchanger, food processing, fruit washing machine, bleaching machine.
Specification of Nickel 201 Fasteners
- Specifications: ASTM B160 / ASME SB 160
- Bolt Size: M3 – M56 | 3/6″ to 2″
- Nuts Size : M3 – M56 | 3/6″ to 2″
- Washers Size : M3 – M56 | 3/6″ to 2″
- Machine Screws Size: M1.6 – M12
- Self Tapping Screw Size: No.2 – No. 14
- Length: 3 mm to 200 mm
- Threads: UNF, BSW, BSF, METRIC, UNC or as required
- Standard : DIN : DIN 934, DIN 931, DIN 970, DIN 933 UTS : UNEF, NPT, UNC, UNS, UNF, NPTF ISO : JIS standards, ISO 4033, ISO 4032, ANSI – American National Standards Institute ASME B18.5 ANSI B 28.2.4 1M as per defined in ASME B16.5 standard SS Stud Bolt length ANSI B 18.2.4 2M as per defined in ASME B18.2.2 SS Hex nuts
- Dimensions: DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3
- Surface Coating: Ptfe Coated Stainless Steel Fasteners Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating
Nickel 201 Fasteners Standard
| Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
| DIN 931 | BS4882 | DIN 934 | DIN 912 |
| DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
| BS 1768 | BS 1769 | DIN 7984 | |
| UNI 5731 | BS 1083 | ANSI B18.3 | |
| UNI 5739 | BS 3692 | ISO 4762 | |
| ISO 4014 | ISO 4032 | UNI 5931 | |
| ISO 4017 | ISO 4033 | BS 2470 | |
| BS 1769 | ANSI B18.2.2 | BS 4168 | |
| BS 3692 | |||
| ANSI B18.2.1 | |||
| Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
| DIN 913 | DIN 963 | DIN 938 | DIN 125 |
| DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
| DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
| DIN 916 | BS 1981 | BS 4439 | BS 3410 |
| DIN 551 | BS 483 | BS 2693 | |
| DIN 553 | BS 2470 | Spring Washers | |
| DIN 438 | DIN 127 | ||
| BS 4168 | BS 4464 | ||
| BS 1802 |
ANSI / ASME Standards Nickel 201 Fasteners (inch series)
| ASME B18.1.1 | Small Solid Rivets | ASME B18.8.1 | Clevis Pins and Cotter Pins |
|---|---|---|---|
| ASME B18.1.2 | Large Rivets | ASME B18.8.2 | Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins |
| ASME B18.2.1 | Square and Hex Bolts and Screws | ASME B18.9 | Plow Bolts |
| ASME B18.2.2 | Square and Hex Nuts | ASME B18.10 | Track Bolts and Nuts |
| ASME B18.2.6 | Fasteners for use in Structural Applications | ASME B18.11 | Miniature Screws |
| ASME B18.3 | Socket Cap, Shoulder and Set Screws | ASME B18.13 | Screws and Washer Assemblies (Sems) |
| ASME B18.5 | Round Head Bolts | ASME B18.15 | Forged Eyebolts |
| ASME B18.6.2 | Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws | ASME B18.17 | Wing Nuts, Thumb Screws and Wing Screws |
| ASME B18.6.3 | Machine Screws and Machine Screws Nuts | ASME B18.21.1 | Lock Washers |
| ASME B18.6.4 | Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws | ASME B18.22.1 | Plain Washers |
| ASME B18.7 | General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps | ASME B18.23.1 | Beveled Washers |
Available Types of Nickel 201 Fasteners
Nickel 201 Bolts
- UNS N02201 Heavy Hex Bolts
- Nickel Alloy 201 J Bolts
- ASTM B160 Nickel Alloy 201 Eye Bolts
- UNS N02201 Bolts
- Nickel® Alloy 201 Foundation Bolts
- Nickel 2.4068 Hex Bolts Manufacturer
- ASME SB160 Alloy 201 Carriage Bolts
- Nickel Alloy 201 Bolts
- Alloy 201 U Bolts Supplier
- Alloy 201 Nickel Bolt
- Nickel 2.4068 Machine Bolts
Nickel 201 Nuts
- Nickel Alloy 201 Nuts
- 201 Nickel Nut
- Nickel Alloy 201 Square Nuts Supplier
- ASME SB160 Alloy 201 Dome Nuts
- Nickel 201 Heavy Hex Nuts
- UNS N02201 Nuts
- ASTM B160 Alloy 201 Coupling Nuts
- UNS N02201 Heavy Hex Nuts
- Nickel 201 Hex Jam Nuts
- Nickel 2.4068 Hex Nuts Manufacturer
- Nickel® Alloy 201 Wing Nuts
Nickel 201 Screws
- Nickel 2.4068 Wood Screw Manufacturer
- Alloy 201 Socket Cap Screw
- ASTM B160 Alloy 201 Hex Head Cap Screws
- Nickel 201 Socket Head Cap Screw
- Nickel® Alloy 201 Self Tapping Screws
- Nickel 201 Screw
- UNS N02201 Screws
- UNS N02201 Machine Screw
- Nickel Alloy 201 Allen Cap Screw Supplier
- Alloy 201 Hex Head Screw
- Nickel Alloy 201 ASME SB160 Hex Cap Screws
Nickel 201 Washers
- Alloy 201 Fender Washers Supplier
- ASME SB160 Nickel Alloy 201 Star Washer
- Nickel 2.4068 Spring Washers
- Nickel 201 Plain Washer Manufacturer
- 201 Nickel Washer
- Alloy 201 Square Washers
- ASTM B160 Alloy 201 Dome Washers
- Nickel Alloy 201 Ogee Washer
- UNS N02201 Fender Washer
- Nickel N02201 Locking Washer
- UNS N02201 Washers
Nickel 201 Stud Bolts
- UNS N02201 Stud Bolts
- Nickel 2.4068 Stud Bolt Manufacturer
- Alloy 201 Stud Bolts Supplier
- UNS N02201 Half Threaded Stud Bolt
- Alloy 201 Threaded Rod
- Nickel Alloy 201 Tie Rod
- Nickel 201 Double Ended Studs
- Nickel 201 Tap End Stud Bolt
- ASTM B160 Alloy 201 Studs
- 201 Nickel Stud Bolt
- ASME SB160 Nickel Alloy 201 Studs
Nickel 201 Anchor Bolts
- UNS N02201 Anchor Bolts
- Nickel Alloy 201 I Anchor Bolts
- Nickel 201 Concrete Anchor
- Nickel 201 Anchor Bolt Manufacturer
- ASTM B160 Alloy 201 Anchor Bolts
- Nickel 2.4068 J Anchor Boltss
- ASME SB160 Alloy 201 Anchor Bolts
- Nickel® Alloy Anchor Bolt
- UNS N02201 Self Tapping Anchor
- Nickel Alloy 201 Anchor Bolts Supplier
- Alloy 201 Sleeve Anchor Bolts
Equivalent Grades of Nickel 201 Fasteners
| STANDARD | WERKSTOFF NR. | UNS | GOST | AFNOR | JIS | BS | EN |
| Nickel 201 | 2.4068 | N02201 | НП-2 | – | NW 2201 | NA 12 | NLC-Ni 99 |
Chemical Composition of Nickel 201 Fasteners
| Grade | Ni | Fe | C | Mn | Si | Cu | Mg | Ti | S |
| Nickel 201 | 99.0 min | 0.4 max | 0.02 max | 0.35 max | 0.2 max | 0.25 max | 0.15 max | 0.1 max | 0.01 max |
Nickel 201 Fasteners Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Contact us to get a quick quote for your requirement.
We offer These Nickel Nut, Bolt, Screw, Washer, Stud Bolt & Anchor Bolt as per ASTM, ASME and API.
Other types of Nickel 201 Fasteners Stock
- Nickel Alloy 201 Hex Head Bolts
- Nickel 2.4068 Socket Cap Screw
- Alloy 201 Fasteners Manufacturer
- Nickel UNS N02201 Nuts
- Nickel 2.4068 Flange Bolts
- Nickel 201 Machine Bolts
- Nickel Alloy 201 Machine Fastener
- Nickel UNS N02201 Carriage Bolt
- Nickel Alloy 201 Hex Set Screw
- Nickel 2.4068 Flat Washers
- Nickel® Alloy 201 Bolts
- Nickel Alloy 201 Industrial Fasteners
- 201 Nickel Slotted Nuts
- Nickel 201 Customized Washer Supplier
- Nickel 2.4068 Threaded Rod
- Nickel UNS N02201 Structural Bolts
- ASTM B160 Nickel 201 Allen Cap Screw
- 201 Nickel Wing Nuts
- Nickel Alloy 201 Tie Bars Stockiest
- Nickel 201 Wing Nuts
- Nickel Alloy 201 Self Locking Nuts Exporter
- Nickel® Alloy 2.4068 Hex Washer Dealers
- Nickel 201 Socket Head Cap Screws
- Nickel UNS N02201 Double Ended Stud
- Alloy 201 Dock Washer
- ASME SB160 Alloy 201 Flange Lock Nut
Exporter of Nickel 201 Fasteners in the following Destinations
Countries
MIDDLE EAST
|
AFRICA
|
EUROPE
|
ASIA
|
Cities
| Bengaluru | Mumbai | Chennai | Hyderabad | Kolkata | Pune |
| New Delhi | Ahmedabad | Jaipur | Surat | Salem | Gandhinagar |
| Bhiwandi | Tiruppur | Sivakasi | Jamnagar | Thiruvananthapuram | Rajahmundry |
| Bhubaneswar | Vijaywada | Firozabad | Bokaro Steel City | Rajkot | Bharuch |
| Panna | Raipur | Cochin | Ludhiana | Panipat | Durgapur |
| Peenya | Pimpri-Chinchwad | Channapatna | Kharagpur | Nashik | Bareilly |
| Varanasi | Haldia | Rourkela | Bangalore | Moradabad | Indore |
| Visakhapatnam | Trivandrum | Pithampur | Dibrugarh | Angul | Gwalior |
| Coimbatore | Kannur | Nagpur | Vadodara | Rudrapur | Noida |
| Agra | Bhagalpur | Jamshedpur | Bhilai | Lucknow | kanpur |
| Thane | Bhopal | Navi Mumbai | Vasai | Bikaner | Maharashtra |